Beiben H06 Car Rearview Mirror Mold
The assembly drawing of the car rearview mirror mold shows that after the mold is closed, the injection molding machine begins to inject ABS into the cavity. After a period of holding pressure for forming, the rear mold starts to separate from the front mold along with the injection molding machine. When the front mold reaches its end position, under the effect of the pull rod and the core clamping force, the plastic part and the flowing condensed material remain on the moving mold. At this moment, the core pulling mechanism begins to drive the side sliding block to complete the lateral core pulling under the effect of the hydraulic cylinder. Under the effect of the ejection mechanism, the plastic part separates from the moving mold. Under the effect of the reset rod and the reset spring, the ejector rod returns to the position where the mold was closed. Finally, the mold closes, completing one working cycle.